Tiger Products Co., Ltd JD 5083E User Manual download pdf (Page 57)

Assembly Section 2-23

ASSEMBLY

MAIN BOOM: “A” Port, Boom UP: 7-9 Seconds

(Note: Extend secondary boom completely; roll deck to be level with ground, and lower

main boom until deck is on ground. Now index main boom “up” function and determine the

time required for main boom to rise completely.)

“B” Port, Boom Down: 6-8 Seconds

(Note: Extend secondary boom completely, roll deck to be level with ground, and raise the

main boom to “full up”. Then index the main boom “down” function to determine the amount

of time required for the deck to contact the ground. CAUTION: Stop the boom just as the

deck contacts the ground.)

SECONDARY

BOOM: “A” Port, Boom Out: 7-9 Seconds

(Position main boom full up, roll deck out until deck cylinder is fully retracted, and bring

secondary boom in completely. Then index the secondary boom “out” function and determine

the time required for boom to extend out completely.)

“B” Port, Boom In: 7-9 Seconds

(Position the main boom full up, roll deck out until deck cylinder is fully retracted, and

extend secondary boom completely. Then index the secondary boom “in” function and

determine the time required for boom to come in.)

DECK ROLL: “A” Port, Deck Out: 5-6 Seconds

(Raise main boom to vertical, extend secondary boom out slightly so that deck can be

articulated without contacting the main boom, and roll deck in until deck cylinder is completely

extended. Then index the deck roll “out” function and determine the time required for the

deck to roll out.)

“B” Port, Deck In: Target 5-6 Seconds (but DO NOT use Limit Screw)

(Raise main boom to vertical, extend secondary boom out slightly so that deck can be

articulated without contacting the main boom, and roll deck out until deck cylinder is

completely retracted. Then index the deck roll “in” function and determine the time required

for the deck to roll in.)

BOOM

SWIVEL: “A” Port, Boom Forward: 7-9 Seconds

(Extend booms completely; rotate head to be level with ground, lower main boom until deck

is just above ground, and swivel boom aft and until near tire. Then index the boom swivel

“forward” function and determine the time required for the boom to swivel full forward.)

“B” Port, Boom Aft: 7-9 Seconds

(Extend booms completely; rotate head to be level with ground, lower main boom until deck

is just above ground, and swivel boom full forward. Then index the boom swivel “aft” function

and determine the time required for the boom to swivel aft. Use caution when doing this,

stop boom before main boom contacts tire.)

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 181 182

No comments

Tiger Products Co., Ltd JD 5083E User Manual Page 57